This ACCEL motorcycle plug wire set is built for Harley Milwaukee 8, Twin Cam, and Sportster applications. It is intended to provide a factory-appearing wire installation while supporting Delphi fuel injection compatibility.

The set gives Harley owners a direct ignition-wire refresh for supported motorcycle platforms without turning the engine bay area into a universal-looking installation. The included wire ties help keep routing clean.

Confirm the motorcycle application and Delphi fuel-injection compatibility before installation. Use the supplied wire ties to route the plug wires in a factory-appearing layout.

This ACCEL Performance Replacement HEI distributor is built for non-computerized GM applications. It uses a CNC-machined 6061 T6 billet aluminum housing, a high-dielectric thermoplastic cap with brass terminals, a 4-pin module with dwell control, and adjustable vacuum and mechanical advance.

The distributor is a direct plug-in factory replacement for supported HEI layouts, giving street vehicles a complete ignition distributor upgrade without needing to reuse old distributor electronics. Easy-access mechanical advance adjustment helps dial in timing behavior.

This version does not include an in-cap coil and is intended for the specified non-computerized applications. Confirm gear, cap, terminal, and advance requirements before installation.

This ACCEL GM LT1 Opti-Spark I distributor is built for supported 1992 to early 1994 spline-drive applications. It uses a cast aluminum housing with a precision bearing, epoxy overmolded brass terminals, and a balanced rotor with a brass blade and stainless steel spring.

The distributor is a direct OEM replacement and is compatible with high-output CD ignition systems. Because Opti-Spark replacement is labor intensive, the upgraded construction helps support a one-time, confidence-focused repair and performance refresh.

Confirm spline-drive compatibility before installation, especially on early LT1 applications. Verify the vehicle build range and distributor drive style before ordering.

This ACCEL Performance Replacement GM Opti-Spark II distributor is built for supported LT1 applications using the pin-drive Opti-Spark layout. It uses a polished housing, optical trigger design, black crab-style cap, sealed cap construction, and brass contacts.

The cap is sealed to reduce corrosion, vented to remove captured heat, and overmolded to reduce arc-over risk. A coated rotor blade and high-dielectric glass-filled cap support longer service life in a distributor location that is known for labor-intensive replacement.

Confirm that the vehicle uses the compatible Opti-Spark II distributor style before installation. Use the installation guide to verify orientation and connector details before replacing the existing distributor.

This ACCEL Points Eliminator Kit converts supported Ford Motorcraft points distributors from high-maintenance mechanical points to electronic triggering. It uses specialized electronic circuitry and an infrared signal.

The system stabilizes ignition timing from 1 to 10,000 RPM while reducing maintenance associated with point ignition systems. ACCEL also notes improved performance and fuel efficiency from the electronic conversion.

The kit is described as easy to install with hand tools. Confirm distributor compatibility before installation and use the installation guide where provided.

This ACCEL Points Eliminator Kit converts supported GM single and dual points distributors from high-maintenance mechanical points to electronic triggering. It uses specialized electronic circuitry and an infrared signal.

The system stabilizes ignition timing from 1 to 10,000 RPM while reducing maintenance associated with point ignition systems. ACCEL also notes improved performance and fuel efficiency from the electronic conversion.

The kit is described as easy to install with hand tools. Confirm distributor compatibility before installation and use the installation guide where provided.

This ACCEL replacement module is built for ACCEL 2010, 2020, and 2030 electronic ignition conversion kits. It uses specialized electronic circuitry and an infrared signal to support stable ignition timing from 1 to 10,000 RPM.

The module helps maintain the benefits of an ACCEL points eliminator setup, including reduced maintenance, improved performance, and improved fuel efficiency. Thermal clad surface-mount construction supports dependability and long service life.

Use this module only with the supported ACCEL points eliminator conversions. It installs with hand tools and carries a limited 90 day supplier warranty.

This ACCEL motorcycle starter drive is built for Harley-Davidson starting-system service. It uses five roller clutches to reduce internal stresses during starter engagement.

Specially hardened receivers help deliver smooth starter engagement, while corrosion-resistant stainless steel springs help eliminate binding. Precision-ground gears support longer service life and help prevent ring gear damage.

Use this starter drive for the confirmed Harley-Davidson application and inspect the related starter and ring gear components during installation. Proper engagement is critical for reliable starting.

This ACCEL Truck Super Tune Up Kit is built for supported Jeep 4.0L applications. It combines 8mm Spiral Core wires, ACCEL classic copper core spark plugs, and a high-performance distributor cap and rotor.

The kit gives Jeep owners a single ignition tune-up package instead of piecing together the major ignition wear items separately. The 8mm wires support ignition delivery, while the cap, rotor, and plugs complete the refresh.

Use the confirmed Jeep 4.0L fitment before installation. The kit is intended for street use and includes the key ignition components listed for a full ACCEL tune-up service.

This ACCEL SuperStock spark plug wire set is an 8mm ignition wire set for supported 1987-1995 small-block Chevy V8 applications. The set uses double silicone wire construction, a Ferro-Spiral core, stainless steel spark plug terminals, and a black high-gloss silicone jacket.

The 500 ohms/ft resistance design helps more ignition energy reach the spark plugs while providing RFI suppression for street and strip use. The wire jacket is rated to 550 degrees F and resists moisture, chemicals, and heat extremes.

A fiberglass braid adds pull strength and terminal retention, while the stainless steel terminals support long service life and corrosion resistance. The set is pre-assembled and includes a coil wire for the supported application.

This ACCEL SuperTuner is a handheld performance programmer for supported GM, Ford, Dodge, and RAM applications. It provides calibration control for fuel, spark, and transmission settings along with diagnostic functions.

The tuner supports shift point and firmness adjustment, tire size and axle gear ratio changes, speed and rev limiter adjustment, active fuel management control, and performance testing for 0-60 and quarter-mile runs.

A 2.8 in color screen supports easier menu navigation, and PC software provides internet updating. The unit carries CARB EO D-745 for the supported applications.