HQ Coil-Over System for 1955-1957 Chevy with 2 piece frame. Includes front and rear HQ Coil-Overs, upper and lower StrongArms, Bolt-On 4-Link and front sway bar. HQ Coil-Over System for 1955-1957 Chevy w/ 2 piece frame.

Additional Features

• R-Joint Rod Ends Combine The Best Qualities Of Low Friction Movement, Lateral Stability, Full Range Articulation, And Quiet Operation Into One Special Bearing That Is As Home On The Street

Mounting kit for rear Shockwaves/Coil-Overs, universal. Includes rear cross member kit, weld-on upper Shockwave/Coil-Over brackets, and billet lower Shockwave/Coil-Over mounts. Mounting kit for rear Shockwaves/Coil-Overs, universal.

Replacement 4-Link bar kit with R-Joints, standard adj. for 1967-1969 GM F-Body (Old Design - Bars Canted Outward). Includes non adjustable lower bars, single adjustable upper bars and R-Joint spacers. Powder coated satin black.

Replacement 4-Link bar kit with R-Joints, standard adj. for 1968-1972 Nova (Old Design - Bars Canted Outward). Includes non adjustable lower bars, single adjustable upper bars and R-Joint spacers. Powder coated satin black.

Replacement 4-Link bar kit with R-Joints, standard adj. for 1970-1981 GM F-Body (Uni-Cradle Design - Bars Canted Inward). Includes non adjustable lower bars, single adjustable upper bars and R-Joint spacers. Powder coated satin black.

Replacement 4-Link bar kit with R-Joints, standard adj. for 1970-1981 GM F-Body (Old Design - Bars Canted Outward). Includes non adjustable lower bars, single adjustable upper bars and R-Joint spacers. Powder coated satin black.

Bolt-On 4-Link for 1962-1967 Chevy II Nova. Includes R-Joints, adjustable upper bars, fixed lower bars, bolt-on cradle, axle brackets and hardware. Powder coated black. For use with Shockwaves or Coil-Overs, sold separately.

This CoilOver System is specifically designed for the vehicle specific model Truck and offers everything needed to provide a lowered stand and excellent ride quality and handling. The package contains front upper and lower control arms, 2-1/2 Inch drop spindles, front and rear HQ Series CoilOvers, front sway bar, rear StrongArms with C-Notches, and adjustable panhard bar. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension. Rear StrongArm System is completely bolt-on and provides mounting for the rear Coil-Overs. The front trailing arm crossmember is designed to allow the exhaust to be run through it rather than under it providing additional ground clearance. The panhard is adjustable so you can optimize your tire clearance at the new lowered height and the mount has been relocated to optimize the bar length and angle for the lowered height. This helps keep the rear end centered in the truck and lowers the roll center to minimize body roll, we use R-Joints on both ends of the bar.

Additional Features

• Front MucleBar Sway Bar Is Manufactured From Massive 1-1/2 Inch X 1/4 Inch Wall Tubing To Minimize Body Roll
• Limited 1,000,001 Mile Warranty

Bolt-On 4-Link with double adj. bars for 1962-1967 Chevy II Nova. Includes R-Joints, bars, bolt-on cradle, axle brackets and hardware. Powder coated black. For use with Shockwaves or Coil-Overs, sold separately. Bolt-On 4-Link with double adj. bars for 1962-1967 Chevy II Nova.

HQ Coil-Over System for 1962-1967 Chevy II Nova. Includes front and rear HQ Coil-Overs, Front Tru-Turn Package with Control Arms, Bolt-On 4-Link and front sway bar. HQ Coil-Over System for 1962-1967 Chevy II Nova.

StreetGrip suspension system for 1963-1982 C2/C3 Corvette. Includes front dual rate coil springs, rear composite leaf spring, delrin control arm bushings, front sway bar and HQ shocks. StreetGrip system for 1963-1982 C2/C3 Corvette.

Rear 6" lowering kit for 2007-2018 Silverado 1500 2WD / 4WD (2019 Legacy & Limited). Includes HQ shocks, axle flip brackets, shackles, hangers, bump stops and hardware. Rear 6" lowering kit for 2007-2018 Silverado 1500.

StreetGrip suspension system for 1990-1993 C1500 454SS, HD spindles and 14 bolt. Includes HD drop spindles, front lowering springs, c-notches, flip brackets, shock relocation brackets, front and rear HQ shocks and hardware. StreetGrip system for 1990-1993 C1500 454SS, HD spindles and 14 bolt.

The TCI 388400 is a spiral cord and microswitch assembly for installing push-button switches on steering wheels. It is a momentary trans-brake switch with a 7 ft spiral cord, 10 amp rating, bulkhead mount, and weatherproof sealed design.

The switch can support transbrake, RollStop, or nitrous activation setups where the driver needs a steering-wheel-mounted control. The 7 ft reach helps route the switch while maintaining driver access.

This assembly includes wiring but does not include a relay or lighted switch. TCI lists Made in USA status and limited 30-day racing or 90-day street-strip warranty coverage.