Fitment-based search is in development — powered by Convermax and SEMA Data

Edge Evolution CTS3 6.7L Cummins 31507-3

SKU: 31507-3

$1,449.95

Edge Evolution CTS3 6.7L Cummins 31507-3

Monitor exhaust gas temperatures from your in-cabin device

Edge Evolution CTS3 6.7L Cummins 31507-3

Correct tire-size calibration for more accurate vehicle data

Edge Evolution CTS3 6.7L Cummins 31507-3

Track critical diesel data including EGT, boost, and trans temp

Edge Evolution CTS3 6.7L Cummins 31507-3

Use built-in diagnostics to check and clear trouble codes

Edge Evolution CTS3 6.7L Cummins 31507-3

Read diagnostic trouble codes without a separate scan tool

Low in stock

Emissions & Compliance

49-State Legal

  • Visa
  • Mastercard
  • Diners Club
  • PayPal
  • American Express
Edge Evolution CTS3 6.7L Cummins 31507-3

$1,449.95

$1,449.95

Up to 70 lb-ft

Torque Gain

Up to 90 lb-ft

Torque Gain

Up to 120 lb-ft

Torque Gain

Product Description

The Edge Evolution CTS3 6.7L Cummins 31507-3 is an Edge Products Evolution CTS3 for 2013-2018 Dodge Ram 2500/3500 - 6.7L Cummins Diesel. It supports performance use while keeping the setup tied to the listed application.

Monitor exhaust gas temperatures from your in-cabin device. Correct tire-size calibration for more accurate vehicle data. Track critical diesel data including EGT, boost, and trans temp.

The specifications are organized for quick verification of diagnostics, calibration, monitoring, and service controls where they apply.

Specifications

Brand
Edge Products
Part Number
31507-3
Type
Evolution CTS3
Vehicle Application
2013-2018 Dodge Ram 2500/3500 - 6.7L Cummins Diesel
Type
Module
Tuning Type
Performance
Emissions
49-State Legal
Reads DTCs
Yes
Clears DTCs
Yes
Transmission Tuning
No
Estimated Install Time
0.5
Power Levels
Level 1 25hp/70tq
Power Levels
Level 2 40hp/90tq
Power Levels
Level 3 50hp/120tq
Power Levels
Level 4 65hp/160tq
Power Levels
Level 5 80hp/200tq
Requirement
Level 6 (Hot Unlock Required) 100hp/300tq
EGT Monitoring
Max EGT Setpoint 900-2000
Vehicle Setting
Backdown Settings Enable/Disable
Timing Control
Advanced Timing Options - Stock/Juice
Tire Size Calibration
Tire Size Adjust 1-50"
Boost Control
Boost Setpoint Levels 1-5
Gear Ratio Calibration
Gear Ratio Adjust 3.0-7.0
Transmission Slip Protection
Automatic Transmission Slip Protection On/Off
Diagnostics
Clear DTC's on Start
Torque Management
Torque Management Adjust Levels 1-5

Fitment / Application

2013-2018 | Ram | 2500 | Big Horn
2013-2018 | Ram | 2500 | Laramie
2014-2018 | Ram | 2500 | Laramie Limited
2013-2018 | Ram | 2500 | Laramie Longhorn
2016-2018 | Ram | 2500 | Limited
2013-2015 | Ram | 2500 | Lone Star
2013-2018 | Ram | 2500 | Outdoorsman
2013-2018 | Ram | 2500 | SLT
2013-2018 | Ram | 2500 | ST
2013 | Ram | 2500 | SXT
2013-2018 | Ram | 2500 | Tradesman
2013-2018 | Ram | 3500 | Big Horn
2013-2018 | Ram | 3500 | Laramie
2014-2018 | Ram | 3500 | Laramie Limited
2013-2018 | Ram | 3500 | Laramie Longhorn
2016-2018 | Ram | 3500 | Limited
2013-2018 | Ram | 3500 | SLT
2013-2018 | Ram | 3500 | ST
2013 | Ram | 3500 | SXT
2013-2018 | Ram | 3500 | Tradesman

What's in the Box

• Edge Evolution CTS3

Installation & Documents

Estimated install time is 0.5 hours for supported applications.

Product Document
Product Document
d10023820_rev00.pdf