A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

The K&N air intake system replaces the restrictive factory air filter and air intake housing on specific RAM 1500 pickup truck models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original upper air filter housing. Air is directed through an aerodynamically engineered intake tube into the engine’s turbo inlet for a guaranteed power gain. The tube accommodates the factory mass air sensor. The tools needed are a flat blade screwdriver, ratchet set a 4 Millimeter allen, and a couple wrenches.

More Features

• Designed To Improve Throttle Response And Engine Sound

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

K&N NextGen cold air intake system is designed as A rotationally molded, high density polyethylene (HDPE) tube helps increase airflow to your engine by 45.3 Percent, delivering a power increase of 34.03 Horse power and 23.83 Newton meter of torque without tuning. This intake system is equipped with a washable, reusable High-Flow LIFETIME Air Filter™ with an oiled cotton filter pad. The oversized, tapered design allows you to drive up to 160,000 kilometer between filter services under normal highway conditions. A NextGen designed air box protects the intake air from the high engine compartment temperatures, and the entire system can typically be installed in less than 60 minutes.

More Features

• Dyno Proven Performance
• Limited Lifetime Warranty

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

K&N NextGen Aluminum cold air intake system is engineered for your Ford F150 V8 5.0L F/I. An American 6063 aluminum rigid tube helps increase the volume of airflow up to 67 percent to your engine and provides an increase up to 14.6 Horsepower and 16.5 Torquewith no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay.

More Features

• Nextgen Airbox: The Hybrid Airbox Features A Semi-Enclosed Airbox That Helps Lower Air Temperatures, An Enlarged Fresh Air Inlet For Improved Airflow, And Better Protection Against Contaminants
• Oversized Air Filter: An Oversized Air Filter Features An Increased Surface Area And A Radius-Entry Design, Both Engineered To Increase Airflow And Enhance Performance
• Simplified Installation: The Design Reduces Mounting Hardware, While Quick-Lock™ Technology Allows The Filter To Snap Into Place. A Sealing Bead Secures The System With Just One Hose Clamp

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

K&N NextGen cold air intake system is designed as A rotationally molded, high density polyethylene (HDPE) tube helps increase airflow to your engine by 45.3 Percent, delivering a power increase of 34.03 Horse power and 23.83 Newton meter of torque without tuning. This intake system is equipped with a washable, reusable High-Flow LIFETIME Air Filter™ with an oiled cotton filter pad. The oversized, tapered design allows you to drive up to 160,000 kilometer between filter services under normal highway conditions. A NextGen designed air box protects the intake air from the high engine compartment temperatures, and the entire system can typically be installed in less than 60 minutes.

More Features

• Dyno Proven Performance
• Limited Lifetime Warranty

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

Gain a guaranteed increase in horsepower and torque with a K&N (R) cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

K&N NextGen cold air intake system is designed as A rotationally molded, high density polyethylene (HDPE) tube helps increase airflow to your engine by 45.3 Percent, delivering a power increase of 34.03 Horse power and 23.83 Newton meter of torque without tuning. This intake system is equipped with a washable, reusable High-Flow LIFETIME Air Filter™ with an oiled cotton filter pad. The oversized, tapered design allows you to drive up to 160,000 kilometer between filter services under normal highway conditions. A NextGen designed air box protects the intake air from the high engine compartment temperatures, and the entire system can typically be installed in less than 60 minutes.

More Features

• Dyno Proven Performance
• Limited Lifetime Warranty

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

This K&N NextGen cold air intake system is engineered for your vehicle. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 59.01 Percent CFM GAIN (driver side) and 38.3 Percent CFM GAIN (passenger side) to your engine and provides an increase of 32.38 Horsepower and 35.52 Torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 Miles between filter services under normal highway driving conditions.

More Features

• Nextgen Airbox: The Hybrid Airbox Features A Semi-Enclosed Airbox That Helps Lower Air Temperatures, An Enlarged Fresh Air Inlet For Improved Airflow, And Better Protection Against Contaminants
• Large-Diameter Tube: The Cad-Designed Intake Tube Features Strategically Positioned Air Channels That Increase Airflow, Boosting Airspeed And Delivering More Air To Your Engine For Added Performance

Gain a guaranteed increase in horsepower and torque with a K&N (R) cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minute. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 90 Minute Or Less With Simple Hand Tools

This K&N NextGen cold air intake system is engineered for your vehicle. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 36.51 percent to your engine and provides an increase of 19.94 horsepower and 19.93 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay.

More Features

• Nextgen Airbox: The Hybrid Airbox Features A Semi-Enclosed Airbox That Helps Lower Air Temperatures, An Enlarged Fresh Air Inlet For Improved Airflow, And Better Protection Against Contaminants
• Large-Diameter Tube: The Cad-Designed Intake Tube Features Strategically Positioned Air Channels That Increase Airflow, Boosting Airspeed And Delivering More Air To Your Engine For Added Performance

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 Minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Miles Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 60 Minutes Or Less With Simple Hand Tools

An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™ featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 Mile between filter services under normal highway driving conditions.

More Features

• Roto-Molded HDPE Intake Tube Paired With Oversized Oiled Cotton Air Filter And Fresh Air Scoop
• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions

An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 Mile between filter services under normal highway driving conditions. The system can typically be installed in less than 90 minute.

More Features

• Roto-Molded HDPE Intake Tube Paired With Oversized Oiled Cotton Air Filter And Fresh Air Scoop
• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions

An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter ™featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 Mile between filter services under normal highway driving conditions. The system can typically be installed in less than 90 minute.

More Features

• Roto-Molded HDPE Intake Tube Paired With Oversized Oiled Cotton Air Filter And Fresh Air Scoop
• Filter Only Requires Cleaning Every 100,000 Mile Under Normal Highway Driving Conditions

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

More Features

• Filter Only Requires Cleaning Every 100,000 Miles Under Normal Highway Driving Conditions
• Typical Installation Can Be Completed In 60 Minutes Or Less With Simple Hand Tools

For over 50 years, K&N has been an industry-leader in automotive filtration and technology offering products to increase performance, protection, and longevity in thousands of vehicle applications for consumers worldwide.

More Features

• Guaranteed Increase In Horsepower And Torque: K&N Cold Air Intake Systems Provide A Less Restrictive Path For Airflow, Increasing The Volume Of Cool, Oxygen-rich Air Into Your Engine
• Improved Engine Sound Hear The Growl: K&N’s Intake Systems Allow Your Engine To Breathe And Sound As It Should Your Engine Will Growl On Acceleration And Return To Quiet Once At Speed
• High Flow Reusable Air Filter: 4 Layers Of Pleated, Breathable Cotton With K And N’s Red Filter Oil To Absorb Dirt & Dust Particles, Allowing Clean Air To Continue Flowing Into Your Engine