The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The cold air intake is specifically engineered for the 2015 To 2016 GM Diesel trucks with the 6.6 Liter LMM Duramax engine. Every cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. The cold air intake was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The cold air intake system features our 2-piece box design that incorporates our boost plenum, a massive 360 Degree SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1-1/4 Inch deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal.

More Features

• Dyno Proven Gains Of Up To 30 Horsepower And 80 Pound Feet Of Torque

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The cold air intake is specifically engineered for the 2015 to 2017 Ford Mustang GT with the 5.0 Liter engine. Every cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. The cold air intake was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The cold air intake system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth rotational molded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1-1/4 Inch deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance.

More Features

• Dyno Proven Gains Of Up To 23 Horsepower And 33 Pound Feet Of Torque
• Durable Roto-Molded Polyethylene Housing And Intake Tube
• Aggressive Under Hood Appearance While Maintaining An OE Fit

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The cold air intake is specifically engineered for the 2015 to 2019 Ford Mustang with the 2.3L EcoBoost engine. Every cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. The cold air intake was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The cold air intake system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth rotational molded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1-1/4 Inch deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance.

More Features

• Dyno Proven Gains Of Up To 15 Horsepower And 16 Pound Feet Of Torque
• Durable Roto-Molded Polyethylene Housing And Intake Tube
• Aggressive Under Hood Appearance While Maintaining An OE Fit

Boost up the performance with the all-new Injen Evolution sealed air intake system. This intake was designed using some of the most modern engineering tools and methods possible, to offer a top quality kit that has no parallel. The sealed air intake syste

More Features

• Dyno Proven: Gains Of Up To 13 Horsepower And 12 Foot-Pounds Of Torque
• Twist-Lock Technology To Securely Integrate The Air Filter To The Housing
• Super Nano-Web Dry Air Filter - No Oiling, Just Back Pulse With 25 PSI Of Air
• Stainless Steel Band Clamps With Inner Protective Liner; Injen Inspection Badge Allows You To Check The Condition Of Your Air Filter
• Aggressive Under Hood Appearance While Maintaining An OE Fit

Introducing the all-new Evolution sealed air intake system for the Toyota Tacoma V6 3.5 Liter ! This intake was designed using the most State of the Art engineering tools and techniques to produce the finest quality kit that is unmatched. From the one-piece sealed housing - that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place - all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake on the market.

More Features

• Dyno Proven: Gains Of Up To 17 Horsepower And 15 Foot-Pounds Of Torque
• Twist-Lock Technology To Securely Integrate The Air Filter To The Housing
• Super Nano-Web Dry Air Filter - No Oiling, Just Back Pulse With 25 PSI Of Air
• Stainless Steel Band Clamps With Inner Protective Liner; Injen Inspection Badge Allows You To Check The Condition Of Your Air Filter
• Aggressive Under Hood Appearance While Maintaining An OE Fit

Introducing the all-new Evolution sealed air intake system for the Toyota Tacoma V6 3.5 Liter ! This intake was designed using the most State of the Art engineering tools and techniques to produce the finest quality kit that is unmatched. From the one-piece sealed housing - that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place - all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake on the market.

More Features

• Dyno Proven: Gains Of Up To 17 Horsepower And 15 Foot-Pounds Of Torque
• Twist-Lock Technology To Securely Integrate The Air Filter To The Housing
• Super Nano-Web Dry Air Filter - No Oiling, Just Back Pulse With 25 PSI Of Air
• Stainless Steel Band Clamps With Inner Protective Liner; Injen Inspection Badge Allows You To Check The Condition Of Your Air Filter
• Aggressive Under Hood Appearance While Maintaining An OE Fit

Introducing the all-new Evolution sealed air intake system. This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel. This cold air intake system is on a whole new level. From the one-piece sealed housing, that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place, all the way down to premium hardware, Injen has put it all on the table to give you, the customer. The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under hood appearance. The Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also features our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights.

More Features

• Dyno Proven Gains Of Up To 15 Horsepower And 13 Pound Feet Of Torque
• Injen Clear-View Badge For Simple Air Filter Inspection
• Durable Roto-Molded Polyethylene Housing And Intake Tube
• Fully Serviceable Injen SuperNano-Web Dry Air Filter
• Stainless Steel Band Clamps With Inner Protective Liner

The Evolution of cold air intakes is here for your 2018 to 2020 Jeep Wrangler JL with the 2.0L Turbo engine. The Evolution cold air intake system by Injen Technology is the next generation performance intake system for your Jeep Wrangler JL. This continues our effort to have a fully modular intake system for the Jeep Wrangler. This is a one-of-a-kind kit that is absolutely the best choice on the market for your Jeep Wrangler. Every EVO5006C cold air intake is made in the USA from cross linked high density polyethylene for extreme durability and long-lasting looks. This kit include stainless steel hardware and automotive grade urethane couplers for a quick and robust installation. Speaking of the installation, the process is simple and does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.

More Features

• Dyno Proven Gains Of Up To 9 Horsepower And 12 Pound Feet Of Torque
• Durable Roto-Molded Polyethylene Housing And Intake Tube
• Fully Serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Aggressive Under Hood Appearance While Maintaining An OE Fit

The Kia Stinger has taken the world by storm with its balance of sports car feel with the added benefit of extreme comfort while on the open road. Injen Technology has taken the new 2018 to 2023 Kia Stinger equipped with the 3.3L Turbo engine deep into our R&D lab to extract the hidden power potential inside the engine and what we have come up is nothing short of amazing. The OE intake tract is very restrictive from the factory and limiting power output by choking the turbo. Our new cold air intake dual ram horn cold air intake opens that intake tract with large, stepped aluminum intake tubes that allows that turbo and engine to breathe deep, while keeping intake velocity up to produce the power that you have been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open your Kia Stinger and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, the cold air intake dual intake system features a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration.

More Features

• Dyno Proven Gains Of Up To 21 Horsepower And 18 Pound-Feet Of Torque
• Stepped From 3 Inch To 2-1/2 Inch To 2-1/4 Inch 6061-T6 Aluminum Intake Tubing
• Features Injen’s Patented MegaRam Technology
• Provides Power Gains While Maintaining A/F Ratios
• Fully Serviceable Injen SuperNano-Web Dry Air Filter

The all-new SP Series cold air intake from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.

More Features

• Dyno-Proven Maximum Gains Of Up To 10 Horsepower And 8 Foot Per Pounds Of Torque
• Provides Power Gains While Maintaining A/F Ratios
• Smooth Intake Piping Eliminates Restrictions And Improves Airflow

The all-new SP Series cold air intake from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.

More Features

• Dyno-Proven Maximum Gains Of Up To 10 Horsepower And 8 Foot Per Pounds Of Torque
• Provides Power Gains While Maintaining A/F Ratios
• Smooth Intake Piping Eliminates Restrictions And Improves Airflow

The cold air intake is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. On top that of that beautiful housing is our Clear-View window for easy filter inspection. This window has an eye-catching red stripe with a white Injen logo that really pops when you open your hood. The cold air intake housing encloses an Injen SuperNano-Web Dry air filter utilizing our patented Twist-Lock technology for a simple install and clean looks. Injen's cold air intake comes with all necessary hardware to provide a simple and fast installation. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional Horsepower and Torque Gains straight out of the box. When it comes to durability, Injen's Evolution series can't be beat. Some of our competitors use an inferior HDPE linear polyethylene to mold their intakes. HDPE is cheap for manufacturing but doesn't come close to the strength and durability of XLPE polyethylene. The XLPE that Injen uses has 20 times the environmental stress crack resistance of HDPE, 10 times the molecular weight of HDPE and 5 times the impact and tensile strength of HDPE. In other words, Injen's Evolution intake systems are built tough and designed to last.

More Features

• Dyno Proven Gains Of Up To 13 Horsepower And 14 Pound Feet Of Torque
• Durable XLPE Roto-Molded Polyethylene Tube And Housing And Air Scoop
• Intake Scoop Is Designed To Capture The Largest Amount Of Cool Air; Injen Clear-View Badge For Simple Air Filter Inspection
• Reinforced Automotive Grade Silicone Couplers; Fully Serviceable Injen SuperNano-Web Dry Air Filter
• Aggressive Engine Tone Under Full Throttle; Smooth Intake Piping Eliminates Restrictions And Improves Airflow

The 2021 to 2022 Toyota GR Supra MK5 with the L4-2.0 Liter turbo engine is an mini-powerhouse from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to help this little 2.0 Liter Turbo engine keep up with this athletic and sophisticated performer. The RandD team took the new Toyota Supra deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2021 to 2022 Toyota GR Supra was a true labor of love. The Injen SP2301 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the GR Supra 2.0 Liter Turbo is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2301 short ram air intake opens up that intake tract with a large 3.250 Inch aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.

More Features

• Dyno Proven Gains Of Up To 10 Horsepower And 9 Pound Feet Of Torque
• Provides Power Gains While Maintaining A/F Ratios – No Additional Tuning Required
• Smooth Intake Piping Eliminates Restrictions And Improves Airflow
• Features Custom Heat Shield Specifically Designed For This Application
• Direct Fit For 2021 To 2022 Toyota GR Supra L4-2.0 Liter Turbo

The hype behind the launch of the all-new vehicle was unreal. Now that you finally have that new vehicle in your hands, it’s time to turn up the juice and add some easy power with the help of Injen Technology. Injen Technology’s new Cold Air Intake for the vehicle’s equipped with the 2.3L EcoBoost engine is here and one look at the stats of this intake system and you will know that it’s the right choice for your new Bronco. A true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install our intake system and you’re set with no check engine lights and no drama. The Cold Air Intake uses a massive intake tube that starts out at 5 Inch at the inlet and smoothly tapers down to 3-1/2 Inch at the turbo. This massive tube allows for huge increases in air volume to feed that hungry turbo for increased performance across the entire RPM band. The system features our 1-piece box design that incorporates our patented Twist Lock air filter attachment technology. The box is molded into our fully functional ram air scoop that is twice the size of OE. This increase allows our intake to capture the maximum amount of cool air to feed that hungry turbo. Make it easy, by designing this kit in a 3D workspace, you are ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood.

More Features

• Massive Intake Tube That Tapers Down From 5 Inch Outer Diameter To 3-1/2 Inch For Increased Airflow
• Large Forward-Facing Inlet Is Twice The Size Of OE To Maximize Incoming Cool Air From Behind The Grille
• No Tune Required - Designed To Work Seamless With The Stock Calibration

The IS series is a traditional, under hood intake system that is placed in the stock location of the factory air box system. Each system is built from 6061-T6 aluminum alloy to ensure the lightest design possible. Every IS system is certified or pending by the California air resource board and backed by Injen technology.

More Features

• Dyno Tuned For Peak Performance Gains
• Constructed Of 6061 Aluminum Aerospace Alloy

These intake systems feature the patent pending MR Technology process for optimal gains and a safe A/F ratio. The SP series does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. SP is The World's First Tuned Intake System.

More Features

• Provides Power Gains While Maintaining A/F Ratios
• Dual Custom Heat Shields Designed Specifically For This Application
• Fully Serviceable Injen SuperNano-Web Dry Air Filter
• Aggressive Engine Tone Under Full Throttle
• Smooth Intake Piping Eliminates Restrictions And Improves Airflow

The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, this SP intake comes with a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes.

More Features

• Provides Power Gains While Maintaining A/F Ratios
• Dyno Proven Gains Of Up To 12 Horsepower And 11 Pounds-Feet Of Torque
• Features Injen’s Patented MegaRam (MR) Technology
• Features Injen’s Patented Air Fusion Technology

The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, this SP intake comes with a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes.

More Features

• Provides Power Gains While Maintaining A/F Ratios
• Dyno Proven Gains Of Up To 12 Horsepower And 11 Pounds-Feet Of Torque
• Features Injen’s Patented Air Fusion Technology
• Fully Serviceable Injen SuperNano-Web Dry Air Filter

SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology, Air Fusion, and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel ratio has been maintained throughout the power band. Additionally, this SP intake features a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel. This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake, You’re in luck, as Injen also offers this intake system in multiple finishes.

More Features

• Dyno Proven Gains Of Up To 12 Horsepower And 9 Pound Feet Of Torque
• Provides Power Gains While Maintaining Air Fuel Ratios
• Fully Serviceable Injen SuperNano-Web Dry Air Filter
• Smooth Intake Piping Eliminates Restrictions And Improves Airflow

The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, this SP intake features a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket.

More Features

• Dyno Proven Gains Of Up To 15 Horsepower And 14 Pound-Feet Of Torque
• Features Injen’s Patented Air Fusion Technology
• Provides Power Gains While Maintaining A/F Ratios
• Features Custom Heat Shield Specifically Designed For This Application
• Fully Serviceable Injen SuperNano-Web Dry Air Filter

These intake systems feature the patent pending mr technology process for optimal gains and a safe air fuel ratio. The sp series does not limit itself to just a cold air system or short ram system. The mr technology process has its effects on both types. Sp is the world's first tuned intake system.

More Features

• Provides Power Gains While Maintaining A/F Ratios
• 2-Piece Design Easily Converts To Short Ram System
• Fully Serviceable Injen SuperNano-Web Dry Air Filter
• Aggressive Engine Tone Under Full Throttle